VR 2pos Sem bracket Timber Junction 3 Discs Home t1 - 2 LHS

VR 2pos Sem bracket Timber Junction 3 Discs Home t1 - 2 LHS

VR 2 Position Semaphore Signals - Bracket Junction Home Timber Mast T1 - 2 LHS
From approximately 1890, the Victorian Railways adopted a 'GNR' (Great Northern Railway, UK) Somersault style semaphore signal, produced by McKenzie and Holland. These signals eventually covered much of the country, and suburban, network, with a very small number still in use on the network today (including some still in use at Frankston). There were, however, many design changes over their lifetime, including different mast designs (including timber, lattice and 'scalean'), and different 'distant' signal designs. As part of the VR's signaling, there were also 'disc' signals for shunting, many of which were mounted on masts for visibility.

This set of VR 2 Position Somersault Semaphore signals covers a range of generic signals, including 3 different major mast types, various bracket and junction signals, and various disc and home signal combinations. Also included as some example of custom placed signals for specific yards (mostly those intended for the Healesville line). All junction signals are controlled by the 'Sig T' objects created by Bloodnok.

This model represents a timber mast junction/splitting home signal doll, with three discs, for on the right hand track of a 'type 1' timber bracket mast, placed on the left hand side of the track. The discs act as part of the 'junction home' signal at this time, due to constraints within Trainz.

Much thanks goes to Jerker and JetStreamSky for the original VR semaphore signals. Although these meshes are essentially new built, they are still based upon models by Jerker and JetStreamsky.

Also much thanks to Bloodnok for his signal scripts and extensive assistance with their setup, without which this project would not have been possible.

These signals are very similar to those used in New Zealand, Great Britain, and also on some other railways in Australia (e.g. the Emu Bay Railway in Tasmania).
Uses targets:
Top Home = Sig T Feather Straight
Bottom Home = Sig T Feather Right 1
Bottom Left Disc = Sig T Feather Left 1
Top Left Disc = Sig T Feather Left 2
Right Disc = Sig T Feather Right 2

Author: S301

VR 2pos Sem bracket Timber Junction 3 Discs Home t1 - 2 LHS
• $screenshot$.jpg 67.60KB
• config.txt 20.67KB
• vsrsemaphoresignal.gs 23.24KB