Bell 206 Jetranger Helicopter Rescue Startup

Bell 206 Jetranger Helicopter Rescue Startup

This is the Bell 206 Jetranger helicopter in the livery of an Australian Westpac Rescue aircraft.

The aircraft initially has the engines stopped. Use the B key to start or stop the engines. For AI operations, use the Aircraft Engine Start Rule, kuid2:60238:80004:1

The helicopter will lift and hover above the track, using the H key - use the H key again to lower the helicopter, or the Aircraft Helicopter Takeoff Rule, kuid2:60238:80005:1. Maximum hover height is 15 metres, variable in the string table above, default setting 10 metres.

It does not have an operating interior, but does have various exterior views based on an invisible interior, use the [ and ] keys from the interior view.

The Aircraft Action Trigger, kuid:76656:24050 when placed on track and set to the correct number will operate the following:

- initially the rotors are stationary, use the B key or triggger setting 2 to start or stop the rotors;
- the helicopter will lift and hover above the track, using the H key or trigger setting 1 - use the H key again to lower the helicopter;
- maximum hover height is 15 metres, variable in the string table above, default setting 10 metres;
- the V key (trigger number 3 setting) will operate the rear passenger doors;
- trigger number 5 lowers or raises the winch.

Military and commercial aircraft sometimes use the same keys and trigger settings for differerent animations. If you find conflict on the same route, set the train priority of the trigger and the particular aircraft to a different value to differentiate.

Bell 206 Jetranger Helicopter Rescue Startup
• aircraft81.gse 2.96KB
body
base.im 1.56KB
base.kin 14.27KB
body.im 226.07KB
env_metal.bmp 12.05KB
env_metal.texture.txt 32 bytes
figure3.texture.txt 30 bytes
figure3.tga 769.04KB
glass.texture.txt 28 bytes
glass.tga 13.04KB
grey_body.texture.txt 32 bytes
grey_body.tga 4.04KB
interior.texture.txt 31 bytes
interior.tga 769.04KB
main_rescue.texture.txt 34 bytes
main_rescue.tga 3.00MB
night.im 1,000 bytes
rear_door_left.im 23.42KB
rear_door_left.kin 11.01KB
rotor_main_levers.im 2.16KB
rotor_main_levers.kin 2.47KB
rotor_main_origin.im 5.55KB
rotor_main_origin.kin 2.46KB
rotor_tail.im 8.82KB
rotor_tail.kin 2.46KB
shadowblack.texture.txt 34 bytes
shadowblack.tga 812 bytes
winch.im 17.04KB
winch.kin 19.81KB
• config.txt 9.12KB
• engine.wav 258.25KB
• preview.jpg 15.19KB
shadow
shadow.im 1.33KB
shadowblack.texture.txt 34 bytes
shadowblack.tga 812 bytes
• start.wav 619.04KB
• stop.wav 814.71KB
• winch.wav 539.98KB